Chapter 5: Menu reference
126 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Choose the keypad and press Enter.
You can now:
• Switch all keypad LEDs to the on or off state using the Enter button.
• Exit keypad LED test. Press Clear to exit from test and restore the LED
states.
1.2.3.2 Trigger state
The trigger state menu allows you to manually change trigger flag states.
Choose the trigger and then choose the appropriate flag. Next, set the required
state.
1.2.4 Panel status
The Panel status menu provides an overview of all abnormal zone states, alarms
and faults present in the system.
Select the required state to view.
1.2.4.1 View open ZN
View abnormal zone states.
All items scroll automatically. Press Enter to exit.
1.2.4.2 Alarms
View active alarms. Press Enter to exit.
1.2.4.3 Faults
View active system faults. Press Enter to exit.
To Next Page
Loading...
Need help?
General
