Need help?Do you have a question about the Intermatic K4023C and is the answer not in the manual?
General| Amperage | 40 A |
|---|---|
| Frequency | 60 Hz |
| Enclosure Type | NEMA 3R |
| Poles | 1 |
| Number of Circuits | 1 |
| Switch Type | SPST |
| Color | Gray |
| UL Listed | Yes |
| Phase | Single |
| Timer Switch Type | Mechanical |
| Maximum Load | 40A Resistive |
| Timer Type | 24 Hour |
| Temperature Range | -40°F to 150°F (-40°C to 65°C) |
Avoid facing the photocell towards the midday sun or artificial light sources.
Ensure proper installation orientation to prevent water entry into the photo control.
Instructions for testing the photo control functionality during daylight.
Specifies the operational temperature range for the photo control.
Details voltage requirements, multi-voltage model behavior, and frequency compatibility.
Illustrates various mounting methods including fixed, stem, swivel, and plug-in types.
Addresses problems like blown fuses and incorrect wiring for the photo control.
Troubleshooting for issues related to light sensing, blinking, or continuous on/off states.
Diagnoses failures like controls not switching off or damage from transients.
Explains end-of-life failure modes for high-pressure sodium or mercury vapor lamps.
To Next Page
