Intermec CK32 Supplementary Guide

For Users Outside of the United States and Canada
Model CK32 Intrinsically Safe Handheld Computer Important Operating Instructions
Intermec Technologies Corporation Model CK32IS has been qualified under the IECEx Scheme and the ATEX Directive of the European
Union by Baseefa as Intrinsically Safe for use in the following hazardous location environments.
Hazardous Locations
IECEx Scheme IECEx BAS 06.0085X - Product Markings
• Ex ia I/IIC T4 (-20°C <
Ta < +50°C)
• Ex iaD 20 T250°C (-20°C <
Ta < +50°C)
ATEX Baseefa06ATEX0317X - Product Markings
• Ex ia I/IIC T4 (-20°C <
Ta < +50°C) IM1/II 1G
• Ex iaD 20 T250°C (-20°C <
Ta < +50°C) II 1D
This means the CK32IS is rated for use as a mining product, Group I, Category M1 as well as non-Mining applications in Group II,
Category 1 for gas/vapor/mist/dust - atmospheres. See Special Conditions of Safe use.
The Ambient Operating Temperature Range for the CK32IS is from -20°C to 50°C.
Battery Pack Output Connector
CK32IS Power Input Connector
CK32IS I/O Connector
Warnings and Cautions
Caution: This marking indicates that the user should read all included documentation before use.
U
o
= 8.4V
I
o
= 5.93A
P
o
= 8.04W
C
i
= 0
L
i
= 0
U
m
= 18V
U
i
= 8.4V
P
i
= 9W 8.4V peak via 630mA fuse.
C
i
= 0 All internal capacitance has been considered as a pure voltage source.
L
i
= 0
U
o
= 8.4V
I
o
= 7.2A
U
o
= 4.61V
I
o
= 344mA
P
o
= 396mW
C
i
= 0 All internal capacitance has been considered as a pure voltage source.
L
i
= 125μH
C
o
= 36 μF
L
o
= 25μH
U
i
= 4.61V
Warning: Explosion Hazard - Substitution of components may impair suitability for safe operation of the CK32IS while
in hazardous environments.
Note: This unit has no operator replaceable parts other than the battery pack. Repair of the CK32IS must be performed
by trained Intermec service personnel.

Intermec CK32 Specifications

General

Brand	Intermec
Model	CK32
Category	PDA
Language	English