CK60 and PB42 Battery Instructions
CK60 and PB42 Battery Instructions
*943-072-001*
P/N 943-072-001
The Model AB11 battery (P/N 318-015-002) is a rechargeable 17.3
Watt-hour, 7.2V, lithium-ion (Li-ion) battery.
You need to fully charge the battery before using it in your
CK60 mobile computer or PB42 portable receipt printer. A fully
discharged battery charges in less than 4 hours.
Use the next table to understand the charging methods
available. To learn more about these charging accessories, see the
instructions that ship with the accessory.
CK60 and PB42 Battery Instructions
Charging the Battery
When the battery reaches the end of its useful life, the
spent battery should be disposed of by a quali ed
recycler or hazardous materials handler. Do not mix
this battery with the solid waste stream. Contact your
Intermec Technologies Service Center for recycling or
disposal information.
Note: In the U.S.A., the EPA does not consider spent
Li-ion batteries as hazardous waste.
Disposal Instructions
Model AB11 Battery Charging Methods
Charging Accessory Model
CK60 4-Position Battery Charger AC4
PB42 4-Bay Battery Charger AC10
CK60 4-Position Communications Dock AD3
CK60 4-Position Charge-only Communications Dock AD4
CK60 Ethernet/USB Communications Dock AD5
CK60 Modem/USB Communications Dock AD6
CK60 Vehicle Dock AV3
CK60 Mobile Computer CK60
PB42 Portable Receipt Printer PB42
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2006 Intermec Technologies
Corporation. All rights reserved.
To Next Page
Need help?
General
