Need help?Do you have a question about the Intermec EasyLAN 10I2 and is the answer not in the manual?
General| Device Type | Print server |
|---|---|
| Form Factor | Plug-in module |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet |
| Compliant Standards | IEEE 802.3, IEEE 802.3u |
| Network / Transport Protocol | TCP/IP |
| Features | auto-negotiation |
Essential safety precautions and warnings for handling Intermec equipment.
Explains the formatting conventions for warnings, cautions, and notes in the manual.
Step-by-step guide on physically connecting the adapter to the network.
Steps to access and log into the adapter's web-based configuration interface.
Setting up network parameters like IP address, subnet mask, and gateway.
Procedures for setting user access and firmware update passwords.
Common problems and solutions related to printer connectivity and operation.
Diagnosing and resolving issues with IP addressing and network connectivity.
Overview of tasks for managing the adapter's operation and status.
Resetting the adapter to its original factory settings using the physical Test button.
Resetting the adapter to factory defaults using the web-based interface.
Instructions for updating adapter firmware using the TFTP protocol.
Instructions for updating adapter firmware using the web interface.
Explains how to send commands to the adapter via the console interface.
To Next Page
