Installing the EasyLAN 10i2 Adapter
1-11
1
Setting Up for a Windows NT 4 PC
To print from a Windows NT 4 PC, you need to prepare the Windows NT 4 PC for
LPR/LPD printing and then install the printer.
To prepare for LPR/LPD printing
1. From the Start menu, select Settings and then Control Panel. The Control Panel
dialog box opens.
2. Double-click the Network icon. The Network dialog box opens.
3. Select Protocols.
4. Add TCP/IP Protocol, select Services, and add MS TCP/IP Printing.
To install a printer
1. Install the InterDriver
for your printer. For help, see the Software page for your
printer on the PrinterCompanion
CD.
2. From the Start menu, select Settings and then Control Panel. The Control Panel
dialog box opens.
3. Double-click the Printers folder.
4. Click Add Printer.
5. Select My Computer, and click Next.
6. Select Add Port.
7. In Printer Ports, select LPR Port, and click New Port.
8. In Add LPR compatible printer, enter the name or IP address of the EasyLAN 10i2
adapter as the server providing lpd. The default name is INTERMEC_
nnnnnn
where
nnnnnn
is the last six digits of the MAC address.
9. Enter pr1, pr2, up to pr8 as the name of the printer or print queue on that server.
10. Choose the printer driver for your printer, and click Next.
11. Enter a printer name, and click Next.
12. Select Shared if you wish to share the printer over the network.
13. Enter a share name, click Next, and then click Finish.
Your can now print from your Windows NT 4 PC to your printer.
To Next Page
Loading...
Need help?
General
