Intermec EasyLAN 10I2

To Next Page

To Previous Page

C39

Before You Begin

Other Intermec Manuals

You may need additional information when working with the EasyLAN 10i2 adapter

with various printers in a data collection system. Please visit our Web site at

www.intermec.com to download many of our current manuals in PDF format. To order

printed versions of the Intermec manuals, contact your local Intermec representative or

distributor.

Main Page

Default Chapter3
- Table of Contents3
Before You Begin5
- Warranty Information5
- Safety Summary5
- Warnings, Cautions, and Notes6
- About this Manual7
- Other Intermec Manuals9
Installing the Easylan 10I2 Adapter11
Introducing the Easylan 10I2 Adapter13
- Physical Description14
- Supported Operating Systems and Network Protocols15
Installing the Easylan 10I2 Adapter16
- Connecting the Easylan 10I2 Adapter to Your Network16
- Turning on the Printer and Printing a Test Label18
- Downloading the IP Address18
Setting up to Print20
- Printing through FTP20
- Printing from a Windows NT 4 PC or Windows 2000/XP PC20
  - Setting up for a Windows NT 4 PC21
  - Setting up for a Windows 2000/XP PC22
- Installing and Using the Intermec Print Monitor22
Configuring the Easylan 10I2 Adapter27
Opening the Web Browser Interface29
Configuring the TCP/IP Parameters30
Configuring the Access and Update Passwords33
Configuring the Parallel Port35
Configuring the Port Services37
Configuring for the Netware Network41
- Configuring the Netware Parameters41
- Configuring Additional Queues43
Configuring for Netbios44
Configuring the DLC Parameters45
Configuring for UNIX46
- Configuring for a Berkeley UNIX Host47
- Configuring for Sun Solaris48
- Configuring for HP-UX49
- Configuring for IBM AIX50
- Configuring for Other Systems50
Troubleshooting and Managing the Easylan 10I2 Adapter51
Troubleshooting Printing Problems53
Troubleshooting Network Configuration Problems53
Managing the Easylan 10I2 Adapter53
- Rebooting the Easylan 10I2 Adapter54
- Setting the Easylan 10I2 Adapter to Factory Defaults55
  - Using the Test Button55
  - Using the Web Browser Interface55
- Printing a Test Label56
- Reloading Firmware57
  - Using TFTP57
  - Using the Web Browser Interface57
- Viewing Ethernet Statistics59
Console Commands61
Sending the Console Commands63
General Commands64
TCP/IP Commands67
Netware Commands68

Table of Contents

Other manuals for Intermec EasyLAN 10I2

Related product manuals