EasyLAN 10i2 Ethernet Adapter User’s Manual
3-6
Set Default Page
2. Click Submit. A page appears telling you that the EasyLAN 10i2 adapter is set to
factory defaults.
Note:
The access and update passwords have been set to the factory default of
intermec.
3. Click Main to return to the Configuration and Management page.
Printing a Test Label
Use the Web browser interface or the Test button to print a test label. This section
explains how to use the Web browser interface. For help using the Test button, see
“Turning on the Printer and Printing a Test Label” in Chapter 1.
To print a test label
Note:
The test label is sent to the printer when you click Print Test Label.
1. From the Configuration and Management page, click Print Test Label. For help
opening the Configuration and Management page, see “Opening the Web Browser
Interface” in Chapter 2.
A page appears telling you that the test label has been sent to the printer.
To Next Page
Loading...
