Intermec EasyLAN 10I2 User Manual

Configuring the EasyLAN 10i2 Adapter
2-3
2
This chapter explains how to configure the EasyLAN 10i2 adapter for advanced and
network specific settings using the Web browser interface and network specific
utilities, such as Novell NWAdmin utility. For information on using console commands
to configure the EasyLAN 10i2 adapter, see Appendix A, “Console Commands.”
Opening the Web Browser Interface
To configure the EasyLAN 10i2 adapter, you need to open the Web browser interface.
To open the Web browser interface
1. Start your Web browser.
2. In the Address (Internet Explorer) or Go to (Netscape) line, enter the IP address for
the EasyLAN 10i2 adapter, and press
Enter
. The Server Access Password page
appears.
3. In the Server Access Password field, enter the password. The default password is
intermec.
4. Click Submit. The Configuration and Management page appears.

Intermec EasyLAN 10I2 Specifications

General

Brand	Intermec
Model	EasyLAN 10I2
Category	Adapter
Language	English