Intermec EasyLAN 10I2 User Manual

EasyLAN 10i2 Ethernet Adapter User’s Manual
2-22
4. Print using the standard lpr command:
lpr –P LabelPrinter filename
5. For AT&T based UNIX systems, such as SCO, use the standard lp command:
lp –d LabelPrinter filename
Configuring for Sun Solaris
To use an EasyLAN 10i2 adapter with Sun Solaris, first use the Host Manager in the
Admintool utility to add the EasyLAN 10i2 adapter’s IP address and name to the
/etc/hosts file.
To use the Host Manager to add the EasyLAN 10i2 adapter’s IP address
1. Open Host Manager in the Admintool utility. For help, see the documentation for
your Sun Solaris system.
2. Click None – Use /etc files on host.
3. Click Apply.
4. Click Edit, and then click Add Host.
5. Enter the EasyLAN 10i2 adapter’s name as the Host Name (this name is anything
you want it to be, but should not have an underscore [_] character in it).
6. Enter the IP address and MAC address of the EasyLAN 10i2 adapter (the MAC
address has the format aa:bb:cc:dd:ee:ff).
7. Click Add.
8. Close the Host Manager windows. Now you are ready to use the Printer Manager in
the Admintool utility.
To use the Printer Manager
1. Open the Printer Manager under Open Windows in the Admintool utility. For help,
see the documentation for your Sun Solaris system.
2. Select Edit.
3. Select Add.
4. Select Add Access to Remote Printer.
5. At the Printer Name prompt, type any desired name for the print queue.

Intermec EasyLAN 10I2 Specifications

General

Brand	Intermec
Model	EasyLAN 10I2
Category	Adapter
Language	English