Intermec EasyLAN 10I2 User Manual

EasyLAN 10i2 Ethernet Adapter User’s Manual
2-4
Configuration and Management Page
You are now ready to configure the EasyLAN 10i2 adapter.
Configuring the TCP/IP Parameters
If you want to configure advanced parameters or update the configuration, you can use
the Web browser interface to configure the TCP/IP parameters.
Note:
If you are using DHCP on your network, the EasyLAN 10i2 adapter may have
automatically acquired valid IP settings, and no further configuration is necessary.
Using DHCP may work well if your DHCP server allows the EasyLAN 10i2 adapter to
keep its IP address permanently, but in most cases, you want to use a static IP address
outside the range reserved for DHCP (see your DHCP server manual for details). You
want a static IP address for when you configure your printer port and to use the Web
browser interface.
To configure TCP/IP parameters
1. From the Configuration and Management page, click Configure TCP/IP Settings.
The Configure TCP/IP page appears. For help opening the Configuration and
Management page, see “Opening the Web Browser Interface” earlier in this chapter.

Intermec EasyLAN 10I2 Specifications

General

Brand	Intermec
Model	EasyLAN 10I2
Category	Adapter
Language	English