Configuring the EasyLAN 10i2 Adapter
2-15
2
2. If you want to add a server, enter a server number in the field and click Add.
3. If you want to remove a server, select a server from the drop-down list and click
Remove.
4. Click Back in your browser toolbar to return to the previous page.
Or, click Main to return to the Configuration and Management page.
Configuring for the NetWare Network
This section explains how to use the Web browser interface to configure NetWare
parameters and how to configure additional queues using the Novell NWAdmin utility.
Note:
Intermec recommends you use the Novell 32-bit client on your Windows PC
instead of the Microsoft NetWare client because it allows direct configuration of print
queues without the need for a Novell utility like NWAdmin or PCONSOLE.
The EasyLAN 10i2 adapter automatically makes itself known on a NetWare network.
The default NetWare Print Server name is PR1. Note that the NetWare Print Server
name is used for either NDS or bindery mode configuration.
If you are configuring the first port with the Web browser interface, the NDS Printer
Name for this port is automatically assigned as INTERMEC
nnnnnn
_P1 where
nnnnnn
is the last six digits of the MAC address. If you are using an alternate configuration
method like NWAdmin, you may assign any unique name for the printer. For help
configuring the first port, see “Configuring the Parallel Port” earlier in this chapter.
You extensively use the Print Server and Printer names while configuring. Note that
these names are actually the names of the EasyLAN 10i2 adapter’s NetWare services. If
desired, you can change the default names using the Web browser interface. For help,
see “Configuring the Port Services” earlier in this chapter.
Configuring the NetWare Parameters
If you do not want to use the default settings, you can use the Web browser interface to
configure the NetWare parameters.
To configure the NetWare parameters
1. From the Configuration and Management page, click Configure NetWare Settings.
The Configure Netware page appears. For help opening the Configuration and
Management page, see “Opening the Web Browser Interface” earlier in this chapter.
To Next Page
Loading...
Need help?
General
