Intermec EasyLAN 10I2 User Manual

EasyLAN 10i2 Ethernet Adapter User’s Manual
2-16
Configure Netware Page
2. Configure the parameters. For information on the parameters, see “NetWare
Parameters Defined” later in this section.
3. To configure services for the port shown in the Enabled Services row, click the link
for the port. For help, see “Configuring the Port Services” earlier in this chapter.
4. Read the information in the Active Servers and Queues row to find out what servers
and queues are enabled.
5. To configure bindery file servers, click Configure Bindery File Servers. For help,
see “To configure bindery file servers and service bindery file servers” earlier in
this chapter.
6. Click Submit. A page appears letting you know that your changes were successful.
7. Click OK to return to the Configuration and Management page.
NetWare Parameters Defined
Parameter Definition Values
NetWare Enable or disable NetWare communications. Enable, Disable
Default = Enable
Enabled services Configure the services on the port you are using. For help, see
“Configuring the Port Services” earlier in this chapter.

Intermec EasyLAN 10I2 Specifications

General

Brand	Intermec
Model	EasyLAN 10I2
Category	Adapter
Language	English