Intermec EasyLAN 10I2 User Manual

Installing the EasyLAN 10i2 Adapter
1-7
1
Plugging in the External EasyLAN 10i2 Adapter
EL10i009.eps
10BaseT
connector
Parallel
port
Parallel port
connector
10BaseT
cable
4. Connect a 10BaseT cable into the 10BaseT connector.
5. Connect the other end of the 10BaseT cable into an Ethernet port for your network.
6. If necessary, plug in the external power supply.
EL10i008.eps
10BaseT
cable
External
power
supply
connector
External
power
supply
7. Switch on the printer. The LED for the EasyLAN 10i2 adapter flashes.

Intermec EasyLAN 10I2 Specifications

General

Brand	Intermec
Model	EasyLAN 10I2
Category	Adapter
Language	English