Intermec CK71 - Accessory Attachment; Installation; Durability

8 CK70 and CK71 Back Accessory Interface (BAI) Integration Guide
Accessory Attachment
For more information on mating surfaces and dimensions, contact Intermec
Product Support. The Product Support team will assist in providing 3D CAD files
in .stp format of the CK70 or CK71 mobile computer, and software related
information.
Installation
You can attach your adapter accessory to the BAI by sliding it into the notch at the
bottom of the mobile computer, and securing it with an 8-32 UNC screw.
The Location of the Screw and Notch
Durability
When used appropriately with the mobile computer, you can install and remove the
BAI up to 500 times. You may see minor wear to the mobile computer or the BAI.
Notch
Screw
Note: Connecting your adapter accessory to the BAI may reduce the mobile
computer battery life.