Intermec CN4

4
INSTALLING THE POWER ADAPTER
OPERATING INSTRUCTIONS
This device allows you to power your CN3 series or CN4 series
computer from a vehicle power port. However, before using the
vehicle power adapter, make sure that the unit is installed as
shown in “Installing the Power Adapter.”
Connect to
vehicle power port
Connect to CN3 or
CN4 through adapter
Note: Connect the power adapter to the CN3 series or CN4 series
computer through an AA15, AA16, AA17, AA18, AR1, or
851-090-001 adapter.
Note: The Model AE11 vehicle power adapter uses an internally
resettable fuse.