Intermec CN4

3
CN3 and CN4 Vehicle Power Adapter (AE11)
Instructions
IMPORTANT SAFETY INSTRUCTIONS
1 SAVE THESE INSTRUCTIONS. This manual contains
important safety and operating instructions for the Model
AE11 vehicle power adapter.
2 Before using the power adapter, read all instructions and
cautionary markings on the power adapter, the battery, and
the product using the battery.
3 CAUTION: To reduce risk of injury, use with only Intermec
Model CN3 series or CN4 series. Use of this product with
other devices may cause injury to persons and damage.
4 Do not expose power adapter to rain, moisture, or snow.
5 Use of an attachment not recommended or sold by Intermec
may result in a risk of fire, electric shock, or injury to persons.
6 To reduce risk of damage to power adapter connector and
cord, pull by power adapter connector rather than cord when
disconnecting power adapter.
7 Make sure that cord is located so that it will not be stepped
on, tripped over, or otherwise subjected to damage or stress.
8 Do not operate the power adapter with a damaged cord or
power adapter connector - replace it immediately.
9 Do not operate power adapter if it has received a sharp blow,
been dropped or otherwise damaged in any way; take it to a
qualified service person.
10 Do not disassemble power adapter; take it to a qualified
service person when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
11 To reduce risk of electric shock, unplug power adapter before
attempting any maintenance or cleaning.
12 Internal voltage regulation within the CN3 series or CN4
series computer limits the voltage supplied to charge the
Model AB8, AB9, AB15, AB16, or AB28 battery. Do not
charge batteries in a modified or damaged CN3 series or CN4
series computer, doing so may result in risk of battery
explosion or fire.