PhoenixBIOS Setup Utility—Chapter 3
37CV60 Vehicle-Mount Computer User's Manual
Legacy USB Support
Press the plus (+) or minus (-) key to enable or disable support for Legacy
Universal Serial Bus (USB) devices. Default is enabled.
Reset Configuration Data
Press the plus (+) or minus (-) key to select whether to clear the Extended
System Configuration Data (ESCD). Default is No.
FirstWare Authentication Level
Press the plus (+) or minus (-) key to select the level of FirstWare authentiĆ
cation, from high, medium, or low. Default is High.
PC Card Boot Support
Press the plus (+) or minus (-) key to dictate whether to support PC card
boot. Default is enabled.
To Next Page
Loading...
