Intermec CV60

PhoenixBIOS Setup UtilityChapter —3
40 CV60 Vehicle-Mount Computer User's Manual
Exit
Use this menu to access exit options, settings, and version information.
Press the up or down arrow keys < ↑↓ > to move the cursor between deĆ
vices. Press the left or right arrow keys < ←/→ > to move the cursor to
another menu.
Exit Saving Changes
Select this option to exit the PSU and save your changes to CMOS. Press
[Enter] to select the option, then press [Yes] to continue. Press [No] to
return to the Exit menu.
Exit Discarding Changes
Select this option to exit the PSU without saving the data to CMOS. Press
[Enter] to select the option, then press [Yes] to continue. Press [No] to
return to the Exit menu.
Load Setup Defaults
Select this option to load the default values for all setup items. Press [EnĆ
ter] to select the option, then press [Yes] to continue. Press [No] to return
to the Exit menu.
Discard Changes
Select this option to discard all current changes and load previous values
from CMOS for all setup items. Press [Enter] to select the option, then
press [Yes] to continue. Press [No] to return to the Exit menu.
Save Changes
Select this option to save current changes to CMOS without exiting the
PSU. Press [Enter] to select the option, then press [Yes] to continue. Press
[No] to return to the Exit menu.