Windows Device Configurations—Chapter 4
47CV60 Vehicle-Mount Computer User's Manual
Device Status
Use the information within this box to monitor whether power to the
9745, Bluetooth, COM1, or COM2 is on or off, the display heater is
installed, and the heater circuit is enabled.
UPS Service
Use this box to start up the UPS service and to set which COM port is to
hold the UPS service, how often to poll the UPS, and set when the unit is
to automatically shut down. Click the dropĆdown arrow to reset the apĆ
propriate values. Check Auto Start Service when OS Start before adjustĆ
ing any values.
To Next Page
Loading...
