Windows Device ConfigurationsChapter —4
68 CV60 Vehicle-Mount Computer User's Manual
2 Tap your stylus firmly at the center of the crosshairs target. Continue
the process as the crosshair moves to the upperĆleft corner, the bottomĆ
left, the bottomĆright, and upperĆright corners of the screen.
3 After all targets are tapped, a message appears to indicate that new calĆ
ibration settings have been measured. Press [Enter] on the external keyĆ
board to accept the new settings and return to the Stylus Properties
screen, or press [Esc] to do another calibration.
4 Tap OK to close the Stylus Properties screen.
To Next Page
Loading...
