Developing and Installing Applications—Chapter 5
85CV60 Vehicle-Mount Computer User's Manual
CV60 XP/XPE:
Mapping a network drive:
You can transfer files between your desktop PC and the CV60 XP/XPE by
mapping a network drive.
To map a network drive, perform the following steps:You may need help
from your IT department for some of the following steps.
1 From your desktop, right-click My Network Places, and from the pop-
up menu select Map Network Drive.
2 From the drive drop-down menu, select the drive you wish to map.
3 In the Shared Directories menu, click the directory you are going to
map.
4 You may wish to map to a folder inside a network drive. If so, double-
click the directory to expose the underlying folders. Click the desired
folder.
5 The information about the drive you are mapping is shown at the top of
the Map Network Drive pop-up window.
6 Drive: The chosen drive.
7 Path: Specified path to desired folder in chosen drive. Connect As: Your
login name.
8 Click OK.
To Next Page
Loading...
