Intermec EasyCoder 3400e Install Guide

067548-001
3400, 4420, and 4440 Cutter Tray Instruction Sheet
You can use two different cutter trays to collect cut labels from your 3400, 4420,
and 4440 printers:
• The basic cutter tray (Part No. 067324)
• The deluxe cutter tray (Part No. 066369)
Both trays hook easily onto the cutter. On the deluxe cutter tray, you can adjust
the angle of the tray and the depth of the tray to match the amount of labels
you plan to cut.
To attach the basic cutter tray
1. Attach the cutter to your printer. For help, see the 3400, 4420, and 4440
Cutter User’s Manual (Part No. 066391).
2. Slide the tray arms under the mounting plate hinges and hook the tray arms
onto the hinges. The tray rests against the front of the printer.
Feed/Pause
Power/Data
Alert
Empty/Pause
IntermecIntermec
4420
Cutter
cover
44XXT.002
Basic
tray
Mounting
plate hinge

Intermec EasyCoder 3400e Specifications

Cutting Specifications

rating for 0.005-inch paper	1, 000, 000 cuts
rating for 0.010-inch paper	500, 000 cuts
cutting method	Guillotine-type blade

Dimensions and Mounting

adds to printer length	0.5 inch
minimum media width	0.75 inch
maximum media width	4.5 inches

Media Specifications

maximum media thickness	0.010 inch
minimum liner weight	40 lb
minimum cut length	1.0 inch