Need help?Do you have a question about the International Biomedical AirBorne 185A+ and is the answer not in the manual?
Overview of the 185A+ Transport Incubator's purpose, features, and intended use.
Details the classification of the transport incubator according to relevant standards.
Provides a summary of safety guidelines for operating the incubator.
Highlights critical safety information, including electromagnetic interference and grounding.
Explains the meaning of symbols used in the incubator's documentation and labels.
Step-by-step guide for unpacking and assembling the 185A+ transport incubator.
Instructions for connecting and preparing air and oxygen tanks for use.
Steps to perform a functional check of the incubator before use.
Description of controls and indicators on the incubator's front display panel.
Details the connectors and features located on the incubator's side panel.
Explanation of the incubator's power sources (AC, DC, battery) and their operation.
Procedures for turning the incubator on and off, including power-up tests.
How to navigate display modes and adjust infant chamber temperature settings.
Instructions for operating optional Pulse Oximeter and Oxygen Monitor features.
Description of the incubator's alarm system and visual indicators.
Information on using the examination light and skin temperature probe.
Explains the underlying principles of pulse oximetry measurement.
Guide to initially setting up the pulse oximeter and alarm limits.
Procedures for configuring high and low alarm limits for SpO2 and pulse rate.
Configuration of algorithm and averaging modes for Masimo pulse oximeters.
Using perfusion index and understanding operational alarms/warnings for pulse oximetry.
Interpreting 'LP' and 'LS' messages from the Masimo pulse oximeter.
Testing operational alarms and information on pulse oximetry sensors.
Guidance on using testers and simulators to verify pulse oximeter functionality.
Explains how the oxygen monitor measures and displays oxygen concentration.
Steps for initial setup and programming high/low oxygen alarms.
Procedure for calibrating the oxygen sensor for accurate readings.
Details operational alarms and testing procedures for the oxygen monitor.
Description of the Maxtec MAX-250E oxygen sensor and its unique chemistry.
Routine checks and maintenance tasks to be performed daily.
Tasks to be performed monthly by a biomedical maintenance person.
Guidelines for inspecting and cleaning the infant chamber.
Procedures for inspecting the cart and associated accessories for wear or damage.
Instructions for inspecting oxygen and pulse oximeter sensors and cables.
Detailed instructions for cleaning various parts of the incubator.
Guidelines for maintaining the incubator's battery to prevent degradation.
Information on the proper disposal and recycling of the incubator and its components.
Common issues and suggested corrective actions for incubator problems.
List of error codes displayed on the main screen and their corrective actions.
Failure codes for optional pulse oximeter and oxygen monitor features.
Procedure for accessing the incubator's electronics compartment.
Step-by-step instructions for removing and replacing the incubator battery.
Procedure for removing the incubator's control board assembly.
Instructions for removing the incubator's display board assembly.
Procedures for removing the PulseOx display and oximeter daughter boards.
List of test equipment needed for calibration procedures.
Overall procedure for calibrating the incubator system after repairs.
Specific calibration steps for the incubator's control board.
Calibration steps for the incubator's display board.
Detailed explanation of the incubator's control board circuitry.
Description of the electronic circuits responsible for temperature control.
Explanation of the failsafe mechanism for heater disable.
Details on how alarm conditions are monitored and triggered.
Description of the power fail alarm and its associated circuitry.
Explanation of voltage reference generation and lamp control circuits.
Description of the battery charger and power source selection mechanisms.
Explanation of the display board's role and its microcontrollers.
Description of main incubator alarms and power indicator LEDs.
How temperature setpoints are managed and the setpoint alarm functionality.
Functionality of the optional Pulse, SpO2, and Oxygen displays.
Physical dimensions, weight, and mounting provisions of the incubator.
Details on power requirements, battery life, and light output.
Parameters like temperature setpoint range, accuracy, and warmup time.
Information on electromagnetic compatibility and interference limits.
Manufacturer's declaration regarding RF and conducted emissions.
Manufacturer's declaration regarding immunity to electromagnetic disturbances.
Guidelines for maintaining safe distances from RF communication equipment.
Key performance criteria for temperature accuracy and alarm functions.
Technical details for the optional pulse oximeter feature, including ranges and accuracy.
Accuracy data for Masimo and Nellcor pulse oximeter sensors.
Technical details for the optional oxygen monitor, including range and accuracy.
List of substances that may interfere with oxygen readings.
Environmental conditions required for incubator operation, storage, and transport.
Details on the manufacturer's warranty terms, exclusions, and limitations.
Contact information for the authorized representative in Europe.
List of available parts, accessories, and contact information for ordering.
Wiring diagram for the system with Masimo PulseOx.
Wiring diagram for the system with Nellcor PulseOx.
Schematic diagram of the incubator's control board.
Schematic diagram of the PulseOx display board.
Schematic diagram of the display board without PulseOx functionality.
Table of resistance values for temperature sensors at different temperatures.
General| Brand | International Biomedical |
|---|---|
| Model | AirBorne 185A+ |
| Category | Accessories |
| Language | English |
To Next Page
