16
5.5 - START-UP
- Before starting up and using the machine, make sur e that it is positioned on the gr ound or
leaning against a stable support and that the r esting surface is level or with a minimum slope.
- It is ESSENTIAL to ensur e that the suction filter is clean befor e use. (see maintenance chap-
ter – 10.2 suction).
1- Open water supply
2- Push ON button
3 - Open the gun with nozzle end up and keep in open position to allow air to escape fr om the
hose.
4 - Regulate water pressure by rotating the regulator knob..
You ar
e ready to work!!!
5 - At the end of working session tur n the machine switch to the OFF position.
6 - Open the gun to r elease remaining pressure from the hose.
To Next Page
Loading...
