EasyManuals Logo

INTERTECHNO ITLS-16 User Manual

INTERTECHNO ITLS-16
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
For all self-learning radio-controlled receivers from
intertechno. 16 (=4x4) random codes from 67 million potential
codes available for high security for switching on, dimming
lighting, operating blinds and garage doors etc. The 4 code
groups (I-IV) for each 4 codes (buttons) can be selected with
the sliding switch on the rear. Fig. 1
“ON” = left-hand side, “OFF” right-hand side of the button.
Fig. 2
Press the “ON” button to start and stop dimming.
To configure a receive, see the respective operating
instructions.
Press the desired “ON” button as soon as the receiver is ready
to learn (LED flashes).
Battery replacement: Fig. 3
If the range decreases, take the battery out and replace it with
a new 3 V CR 2032 battery.
The LED display is not an indication of the level of battery
charge.
The Declaration of Conformity can be found at
www.intertechno.at/CE
GB
Operating instructions
Για όλους τους αυτοπρογραμματιζόμενους τύπους
ασύρματων δεκτών της intertechno.
Για την ενεργοποίηση και απενεργοποίηση, την αυξομείωση
της έντασης του φωτισμού, τον έλεγχο των περσίδων και της
πόρτας του γκαράζ κ.λπ. 16 (= 4x4) τυχαίοι κωδικοί από 67
εκατ. πιθανούς συνδυασμούς είναι στη διάθεσή σας προκει-
μένου για τη μέγιστη δυνατή ασφάλεια. Οι 4 ομάδες κωδικών
(I-IV) για κάθε έναν από τους 4 κωδικούς (πλήκτρα) μπορούν
να επιλεγούν με το συρόμενο διακόπτη που βρίσκεται στην
πίσω πλευρά. Εικ.1
«ΟΝ» = αριστερή πλευρά, «OFF» = δεξιά πλευρά του
πλήκτρου. Εικ.2
Για να εκκινήσετε και να σταματήσετε τη λειτουργία
αυξομείωσης του φωτισμού, πατήστε το πλήκτρο ON.
Για την αποθήκευση ενός δέκτη ακολουθήστε την αντίστοιχη
οδηγία χειρισμού.
Μόλις ο δέκτης βρίσκεται σε ετοιμότητα (η λυχνία LED
αναβοσβήνει) πατήστε το επιθυμητό πλήκτρο «ON».
Αντικατάσταση μπαταρίας: Εικ. 3
Σε περίπτωση μείωσης της εμβέλειας αντικαταστήστε την
μπαταρία με μια νέα μπαταρία 3V CR 2032.
Η ένδειξη LED δεν αποτελεί ένδειξη για το επίπεδο φόρτισης
της μπαταρίας!
Η δήλωση συμμόρφωσης διατίθεται στην ηλεκτρονική
διεύθυνση www.intertechno.at/CE
GR
Οδηγίες χρήσης
ITLS-16
ITLS-16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the INTERTECHNO ITLS-16 and is the answer not in the manual?

INTERTECHNO ITLS-16 Specifications

General IconGeneral
InterfaceRF Wireless
Input typePress buttons
Product colorWhite
Brand compatibilityintertechno
Remote control proper use-
Built-in displayNo
Maximum range- m
LED indicatorsYes
Battery typeCR2032
Battery voltage3 V
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth22 mm
Width31 mm
Height115 mm
Weight- g

Related product manuals