Intertek ACVC96 - User Manual

RS6612010
August 2014
This manual is to be used by qualified, professionally trained HVAC technicians only. Goodman does
not assume any responsibility for property damage or personal injury due to improper service
procedures or services performed by an unqualified person.
Copyright © 2014 Goodman Company, L.P.
Service Instructions
The material in this manual does not supercede manufacturer's installation and operation instructions
TM
34.5" Chassis
ACVC96/AMVC96
GCVC96/GMVC96
Gas
Furnaces
is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.
®

Intertek ACVC96 Specifications

General

Brand	Intertek
Model	ACVC96
Category	Furnace
Language	English

Summary

Important Information

Safety Precautions

Essential safety guidelines and warnings before operating the furnace.

Operating Instructions

Step-by-step procedure for safe furnace operation.

Product Identification

Model Number Breakdown

Detailed explanation of furnace model number configurations.

Accessory Identification

Listing and description of available furnace accessories.

Installation Considerations

General Safety and Precautions

Critical safety warnings and considerations for furnace installation.

Location Requirements

Guidelines for selecting proper installation locations to ensure safety and performance.

Thermostat and Wiring Requirements

Specifications for thermostat installation and electrical wiring.

System Operation

Normal Operation Sequences

Describes standard operating sequences for furnace modes.

Heating Mode Operation

Detailed operational sequence during heating cycles.

Cooling Mode Operation

Detailed operational sequence during cooling cycles.

Troubleshooting

Abnormal Operation Symptoms and Codes

Identifies common issues, symptoms, and diagnostic codes.

Error Code Reference

A comprehensive list of error codes and their interpretations.

Servicing

Checking Electrical Voltage and Wiring

Procedures for testing voltage and wiring integrity.

Testing Limit Controls and Switches

Steps for testing primary and auxiliary limit controls.

Maintenance

Annual Furnace Inspection

Recommended annual checks for proper furnace function.

Filter Maintenance Procedures

Instructions for filter removal, replacement, and cleaning.

Accessory Wiring Diagrams

All Fuel System Control Board Wiring

Wiring diagram for the AFE1860A all-fuel system control board.

De-Humidistat Wiring Diagram

Wiring diagram for the DEHUM1 de-humidistat accessory.