To Next PageTo Next Page
Need help?Do you have a question about the Intertek GMVC96 and is the answer not in the manual?
General| AFUE | 96% |
|---|---|
| Fuel Type | Natural Gas |
| Blower Motor | Variable Speed |
| Vent Type | Direct Vent |
| Warranty | Lifetime Heat Exchanger, 10-Year Parts |
Critical safety warnings, ESD precautions, product application, and general installation requirements.
Guidelines for furnace placement, clearances, and considerations for air quality and temperature.
Step-by-step description of furnace operation for power-up, heating, and cooling modes.
Table correlating abnormal symptoms with diagnostic codes, possible causes, and corrective actions.
Detailed listing of diagnostic codes (E, d, b) and their corresponding fault descriptions and probable causes.
A complete list of all diagnostic error codes, their meanings, and associated furnace functions.
Procedures for checking power phasing, voltage, and transformer function for proper furnace operation.
Step-by-step guides for checking furnace voltage, thermostat wiring, and anticipator settings.
Procedures for testing transformers, control circuits, and 4-wire ECM motors.
Methods for measuring duct static pressure and furnace temperature rise for performance optimization.
Instructions for testing primary limit controls to ensure safe furnace operation.
Procedures for testing auxiliary limit controls and flame rollout safety devices.
Steps for testing the induced draft blower motor and the redundant gas valve.
Procedures for measuring inlet and manifold gas pressures for Natural Gas and Propane.
