To Next PageTo Next PageWhy Intertek DELLA has bad cooling effects?
If your Intertek Air Conditioner isn't cooling well, try these solutions: Close any curtains to block direct sunlight. Shut doors and windows to isolate the room, and eliminate any other heat sources. Also, ensure that the air filter is clean; if it's dirty, clean or replace it. Lastly, check that neither the air inlet nor the outlet is blocked by any obstructions.
What to do if Intertek Air Conditioner fails to start up?
If your Intertek Air Conditioner unit fails to start, first, ensure it's connected to a working power socket and turned on. If the water-full indicator is lit, drain the water from the unit. Confirm that the ambient temperature is within the recommended range of 10-35°C (50-95°F). Lastly, if in cooling mode, make sure the room temperature isn't lower than the set temperature; if it is, adjust the set temperature accordingly.
What to do if Water-full indicator lights on Intertek Air Conditioner?
If the water-full indicator lights up on your Intertek Air Conditioner, it means the water in the chassis is full. To resolve this, drain the water and restart the unit.
What does error code E4 mean on Intertek DELLA Air Conditioner?
If your Intertek Air Conditioner LED displays error code “E4”, it indicates anti-freeze protection is active. The unit will automatically restore its functions once the anti-freeze protection cycle is complete.
What does error code E1 mean on Intertek DELLA Air Conditioner?
If your Intertek Air Conditioner LED displays error code “E1”, it indicates a tube temperature sensor failure. You should check the tube temperature sensor and related circuits.
What does error code E2 mean on Intertek DELLA?
If your Intertek Air Conditioner LED displays error code “E2”, this indicates a room temperature sensor failure. Check the room temperature sensor and its related circuits.
General| Brand | Intertek |
|---|---|
| Model | DELLA |
| Category | Air Conditioner |
| Language | English |
Details electrical requirements and compliance for safe operation.
Lists essential warnings and cautions to prevent hazards like fire, shock, and injury.
Explains the unit's control panel and how to perform basic operations.
Details how to select modes, adjust settings, and understand operating principles.
Covers advanced modes, timer functions, and remote control usage.
