Fig.3
⚫ Place the front glass and steel panel surround over the front of the fire aligning the
slots in the bracket at each side of the glass panel with the lugs on the sides of the fire;
See Fig.3
⚫ Again, two people will be required for this operation.
-5-
⚫ Fix the steel penal with 4 pcs of 4*8mm screws provided.(Fig.4)
Fig.4
Manual Operation
⚫ The switches located at the center right hand side of the fire .The standby switch must
be first switch on.
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND
RETAINED FOR FUTURE REFERENCE
-6-
To Next Page
Loading...