Intex 128474GN - Filter Pump Motor Disassembly

295
A
S AVE THESE INSTRUCTIONS
English
Page 23
A295I019EN
Ifthereisaneedtoreplacetheltermotor(forqualiedtechnicianonly),followbelowstepsto
disassemble it:
IMPORTANT: You must drain out any remaining water inside the piping system of the control base
before replacing any parts.
Tools required: One adjustable wrench and one Philip screwdriver.
NOTE: The“specialwrenchtool”isincludedwiththenewlterpumpmotorreplacementandnot
with the spa set.
FILTER PUMP MOTOR DISASSEMBLY
1 2 3
4 5 6