How to get rid of algae in Intex Swimming Pool?
If you observe algae in your Intex Swimming Pool, it's typically due to an imbalance in your pool's chlorine and pH levels. To resolve this, super chlorinate the water with a shock treatment and adjust the pH to the level recommended by your pool store. Vacuum the pool bottom thoroughly and maintain the correct chlorine level to prevent future algae growth.
What to do if there is floating matter in my Intex Swimming Pool?
If you notice floating matter in your Intex Swimming Pool, it could be due to several reasons. It may be caused by 'hard water' resulting from a high pH level, low chlorine content, or foreign matter in the water. To address this, correct the pH level, consulting with your pool dealer for advice if needed. Also, ensure the chlorine level is appropriate and clean or replace your filter cartridge.
Why is the water colored in my Intex Swimming Pool?
If the water in your Intex Swimming Pool is colored, it's likely due to the oxidation of copper, iron, or manganese in the water caused by the added chlorine. To fix this, adjust the pH to the recommended level and run the filter until the water becomes clear. Replace the filter cartridge frequently to maintain water quality.
What to do if Intex Swimming Pool has chronic low water level?
If you are experiencing a chronic low water level in your Intex Swimming Pool, it is probably due to a rip or hole in the pool liner or hoses. You can repair these damages with a patch kit. Make sure to finger-tighten all caps. If the problem persists, replace the hoses.
How to remove sediment on the bottom of Intex Swimming Pool?
If you find sediment accumulating on the bottom of your Intex Swimming Pool, it's likely due to heavy use, such as people frequently entering and exiting the pool. To resolve this, use an Intex pool vacuum to regularly clean the bottom of the pool.
What to do if Air Jet Valve is leaking in Intex Swimming Pool?
If the air jet valve on your Intex Swimming Pool is leaking, several issues could be the cause. Ensure the air jet valve is tightened and facing upwards. If that doesn't solve it, try turning the pump on for a few seconds, then off, repeating this process three times. If leakage continues, remove the air jet valve, flush out any dirt with water, and then replace the valve. If none of these steps work, consider replacing the air jet valve with a new one.
How to remove surface debris from Intex Swimming Pool?
If you're dealing with surface debris in your Intex Swimming Pool, it's probably because the pool is too close to trees. To resolve this, use an Intex pool skimmer regularly to remove the debris.
What to do if Pool Inlet Air Adaptor is leaking in Intex Swimming Pool?
If the pool inlet air adapter on your Intex Swimming Pool is leaking, it is probably because the hose clamps are not well-fitted. To fix this, tighten or reinstall the hose clamps.
Why is the Inlet Treaded Air Connector leaking in my Intex Swimming Pool?
If the inlet treaded air connector on your Intex Swimming Pool is leaking, it's likely the plunger valve is not well-fitted. Try tightening or reinstalling the plunger valve to resolve this issue.
General| Brand | Intex |
|---|---|
| Model | 28003E |
| Category | Swimming Pool Cleaners |
| Language | English |
Details requirements for safety barriers around residential swimming pools, including dimensions and openings.
Guidance on emergency preparedness, including phone availability and CPR certification.
Guidelines for choosing a suitable outdoor location and preparing the ground for pool setup.
Step-by-step assembly of pool components, including liner, beams, legs, and filling with water.
Guidance on placing safety signs in visible areas around the pool.
Instructions for maintaining pool water balance and using sanitizers.
Procedures for draining the pool and preparing it for long-term storage.
Details the one-year warranty for the pool liner and frame, including claim procedures.
Step-by-step guide for assembling the pool vacuum cleaner components.
Instructions for operating the pool vacuum cleaner with the filter pump.
Instructions for assembling and operating the hand-held skimmer net and brush.
Guidance on disassembling and storing the maintenance kit components for long periods.
To Next Page
