(94IO) “ISO” KAYAK (TYPE IIIB) ENGLISH 4.875” X 7.25” 08/31/2022
SAVE THESE INSTRUCTIONS
Page 7
94
A
Paddle Assembly:
1. Press and align the push-bottom on the short shaft with the paddle blade hole, ensure the
push-bottom is securely snapped onto the paddle blade hole.
2. Join the 3 shafts together with the couplers and securely tighten the coupler covers.
3. To disassemble, reverse the assembly steps. Note: is not necessary to detach the paddle blades
from the shafts.
Safety and Operating Instructions
Before Departing from the Shore or Dock
Know all required information and inform your passengers:
•
Take a boating safety course and get hands-on training from your boat dealer or local boating
authorities.
•
Know all local regulations and hazards related to water activities and boat operation.
•
Check weather forecast, local currents, tides and wind conditions.
•
Advise someone on land of the time you plan to be back at your starting point.
•
Explain basic boat operation to all passengers.
•
Children and non-swimmers need special instructions in the use of life jacket or Personal Flotation
Device (PFD).
•
Be sure that one of your passengers can operate the boat in case of emergency.
•
Learn how to determine the distance you can cover, and remember that bad weather conditions can
alter this.
•
Review all safety requirements regularly.
Check the working condition of the boat and equipments:
•
Check inflation pressure.
•
Inspect the valves caps.
•
Check the load is evenly distributed, fore (front) to aft (back) and side-to-side.
1
2
84” (213cm)
4
86” (218cm)
1 2
3
A
BC
To Next Page
Loading...
Need help?
General