Do you have a question about the Intex EXCURSION PRO and is the answer not in the manual?
Details the compliance of Intex kayaks with ISO 6185 and NMMA standards.
Provides critical safety advice and warnings for kayak operation and usage.
Explains the format and meaning of the craft's label information.
Details requirements for inflatable boats according to ISO 6185 standards.
Specifies maximum load capacity and person limits for the kayak.
Instructions on how to install and remove the kayak's skegs.
Guide on how to attach and use the fishing rod holder.
Instructions for inflating and placing the seat booster pad.
Details the compliance of Intex kayaks with ISO 6185 and NMMA standards.
Provides critical safety advice and warnings for kayak operation and usage.
Explains the format and meaning of the craft's label information.
Details requirements for inflatable boats according to ISO 6185 standards.
Specifies maximum load capacity and person limits for the kayak.
Instructions on how to install and remove the kayak's skegs.
Guide on how to attach and use the fishing rod holder.
Instructions for inflating and placing the seat booster pad.
| Air Chambers | 3 |
|---|---|
| Air Valves | Boston valves |
| Floor Type | Inflatable I-beam floor |
| Weight Capacity | 400 lbs (180 kg) |
| Dimensions | 384 x 94 x 46 cm (151 x 37 x 18 inches) |
| Includes | high-output pump, carry bag, repair patch |
| Oar Length | 86" (218 cm) |
| Capacity | 2 person |
| Category | Inflatable boat |












Loading...