EasyManuals Logo

Intex PureSpa SJB-HS-10-1 User Manual

Intex PureSpa SJB-HS-10-1
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
264
PO
S AVE THESE INSTRUCTIONS
(264PO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 05/10/2017
English
Page 9
SET UP (continued)
In ate the Spa Cover Air Bladder
1.
Open the in ation valve and insert the in ation hose
(7)
into the valve; press to in ate
until it is rm to the touch but not hard
(see drawing 6)
.
2.
Disconnect the in ation hose
(7)
from the air blower in ation outlet and the valve.
3.
Replace the control base in ation cap
(9)
back; close and recess the in ation valve.
NOTE:
If there is a need to add some air to the spa tub wall or spa cover air bladder after they have been
setup, refer to above “In ate the Spa Tub Wall” and “In ate the Spa Cover Air Bladder” sections. The cover
air bladder is preinstalled inside the spa cover. If it needs to be reinstalled, place the unin ated air bladder
inside the spa cover lip before in ating the bladder.
5
4
7
1 2
6
7
3
9
24
4.
Press the button to turn on the control unit panel buttons rst. Press the button to in ate the
spa tub wall for 8 to 10 minutes until it is rm to the touch but not hard
(see drawing 5)
.
IMPORTANT:
Do not over in ate or use high pressure air compressor to in ate.
5.
Press the button again to turn it off.
6.
Replace the air valve cap back.
NOTE:
The cap is designed to be screwed on and off. Never exert force as this could cause the
complete internal in ation system of the valve to come loose. See “Spa Tub Air Valve Fastening” for
valve maintenance.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intex PureSpa SJB-HS-10-1 and is the answer not in the manual?

Intex PureSpa SJB-HS-10-1 Specifications

General IconGeneral
BrandIntex
ModelPureSpa SJB-HS-10-1
CategoryHot Tub
LanguageEnglish

Related product manuals