S
Steven SmithSep 8, 2025
What to do if Intex Hot Tub bubble air blower does not work?
- TtroblesSep 9, 2025
If the bubble air blower of your Intex Hot Tub isn't working, turn off and unplug the spa. Let it cool down, then restart it.
To Next PageTo Next PageWhat to do if Intex Hot Tub bubble air blower does not work?
If the bubble air blower of your Intex Hot Tub isn't working, turn off and unplug the spa. Let it cool down, then restart it.
Why is my Intex Hot Tub leaking between the spa tub and control unit connectors?
Leakage between the spa tub and control unit connectors of your Intex Hot Tub may occur if the connections are not securely tight, or if the o-ring is missing or dirty. Tighten the inlet and outlet connections. Coat the o-ring with petroleum jelly for a waterproof seal. Remove the grid from inside the spa with a screwdriver and ensure the inlet/outlet O-ring is in place, clean, and not damaged.
Why does my Intex PureSpa SSP-H-20-1 Hot Tub have a strange shape?
If your Intex Hot Tub has a strange shape, it might be due to expanded internal air pressure from strong sunshine. Avoid exposing the product to direct sunlight. Check the air pressure and release air if necessary, especially during hot weather, to prevent damage.
Why is my Intex PureSpa SSP-H-20-1 Hot Tub so noisy in filtration mode?
If your Intex Hot Tub is noisy only during filtration mode, ensure the control panel, back cover, and all inlet/outlets are securely connected. Also, make sure the ground is level, firm, and smooth.
General| Model | SSP-H-20-1 |
|---|---|
| Type | Inflatable Hot Tub |
| Air Jets | 140 high-powered bubble jets |
| Water Capacity | 210 gallons |
| Temperature Range | Up to 104°F |
| Inflation System | Built-in inflation system |
| Included Accessories | Insulated cover, carry bag |
Critical risks like drowning, injury, and electric shock.
Important precautions for electrical safety, usage, and health.
Step-by-step guide to test the residual current device before use.
Visual overview and listing of all spa components.
Location, surface, and clearance needs for installation.
Specific guidelines for setting up the spa indoors.
Specific guidelines for setting up the spa outdoors.
Steps to assemble the spa's control unit.
Instructions for inflating the spa tub and cover air bladder.
Instructions for deflating the spa tub and cover.
Steps for installing the spa control unit.
Description of buttons and display functions for operation.
Importance of keeping spa water clean and sanitized.
Filter care and cleaning the spa tub.
Recommended levels for chlorine, pH, and alkalinity.
Procedures for adjusting water chemistry levels.
How to properly drain the spa tub.
Detailed steps for cleaning the spa tub.
Instructions for tightening the air valve.
How to check the spa cover for damage.
