Intex PureSpa SSP-H-20-1C User Manual

244
IO
(244IO) 7.5” X 10.3” ENGLISH 08/12/2019
 • Toproperlyattachtheinationnozzleofthehose(thesmallerendofthehose),pushitintothe
  valveandtwistitclockwiseuntilitlockswiththevalve(youmayhearaclick).Toremovethenozzle
  uponination,twistitcounterclockwiseandpullitoutofthevalve.
 • Oncethespatubisproperlyinated,makesuretoclosethevalvecapfortheproperairtightseal.
HEATING AND WATER TEMPERATURE:
 • Fillingwithheatedwater:Youmayuseheatedwatertollthespa,whichwillshortentheinitial
  heat-uptime.However,makesurenottousewaterexceedingthenormalspaoperating
  temperatureswhicharenottoexceed40°C.Waterover40°Cwillturnofftheheatingunitandis
  notconsideredsafe.Alwayscheckthewatertemperatureinyourspabeforeuseandrefertothe
  owner’smanualfordetailedinformationonsafeuse.
 • Maintainingidlewatertemperature:YourPureSpaislikeanyhouseholdapplianceoraxedspa,
  andforcontinuoususeyoumaychoosetosetacertainidletemperaturetobemaintainedin
  thespawhennotinuse.Thiswillallowshorterheat-uptimeforwhenyoudecidetouseit.For
  example,maintainingthespawatertemperatureat30°Cwillallowreaching38°Cinapproximately
  4hours.Remember,thewatertemperatureincreaseisapproximately2°Cperhourofheating(may
  varydependingonoutsidetemperatureandconditions),soplanyourspauseaccordingly.
NOTE:TheSpahasasafetyshut-offfeaturewhichwillturnofftheheatingunitafter72hoursof
  continuousheatingifthesettemperatureisnotreachedwithinthatperiod.Thismayoccurin
  coldexternalconditionsthatmaypreventthesettemperaturefrombeingreached.Inthatcase
  yourspaheatingunitwillshutoffanddisplaycode“END”,requiringpushingthetemperature
  settingbuttonandre-settingthetemperaturetore-starttheheatingunit.Tryalowermore
  reachabletemperatureforthegivenconditions,whichwillnotrequirere-startingtheheatingunit
  after72hours.
 • Watertemperatureduringuse:Whenyouareusingthespa,thewatertemperaturewillnaturally
  decreaseslightlyovertime.Theexpectedtemperaturedecreasecanbeanywherebetween1°C
  and2°Cperhourdependingonexternalconditions.Aslongastheheatingunitisturnedonwith 
  asettemperature,itwillstartheatingthewaterautomaticallywhenwatertemperaturedropsby 
  1-2°Cfromthesettemperature.
  Example:Ifyoursettemperatureis39°C,theheaterwillnotcomeonuntilthetemperaturedrops
  to37°C.Ifyoushouldwishtoheatitbackupsooner,youcansimplyre-settheheaterbyturningit
  offandbackontostartheatingtoyourpreferredtemperature.
SPA COVER:
 • Thecoverisanimportantpartofyourspaasitiscrucialforheatingupthewaterandmaintaining
  thetemperaturewhenspaisnotinuse.Furthermore,itisacrucialsafetyelementforpreventionof
  unauthorizedaccesstothespaespeciallybychildren.
 • Notethattheattachmentbucklesofthecoverarelockingbuckles.Twokeysareprovidedinthe
  plasticbagwiththemanualandotheraccessories.Eachbuckleismarkedwith“locked”and
  “unlocked”symbolsforeasyoperation:putthekeyintotheslotonthebuckleandturnittothe
  appropriatepositiontolockorunlockthebucklerespectively.
 • Toassuresafetyfromunauthorizedaccess,alwaysputthecoveronwhenspaisnotinuseand
  lockallbuckles.Alwayskeepthekeysoutofreachofchildren.
 • Incaseyoumisplacethekeys,youcanuseanysimilarsizeatscrewdrivertolockorunlockthe
  buckles.
SAVE THESE INSTRUCTIONS

Intex PureSpa SSP-H-20-1C Specifications

General

Brand	Intex
Model	PureSpa SSP-H-20-1C
Category	Hot Tub
Language	English