To Next PageTo Next Page
Need help?Do you have a question about the Intex Seahawk 2 Set and is the answer not in the manual?
General| Type | Inflatable Boat |
|---|---|
| Material | PVC |
| Air Chambers | 3 |
| Oar locks | Yes |
| Grab handle | Yes |
| Capacity | 2 people |
| Length | 93 inches |
| Width | 45 inches |
| Weight Capacity | 440 lbs |
| Accessories | Oars |
| Dimensions | 93in X 45in X 16in |
| Inflation Time | Approximately 10 minutes |
Details compliance with European Directives and US regulations.
General safety precautions, warnings, and boat design category information.
Explains the components and information found on the boat's label.
Illustrates the Challenger series boat with numbered parts and seating arrangement.
Illustrates the Seahawk series boats with numbered parts and seating arrangement.
Illustrates the Excursion series boats with numbered parts and seating arrangement.
Illustrates the Mariner series boats with numbered parts and seating arrangement, including a description table.
Step-by-step guide on using the Boston valve for inflation and deflation.
Instructions for inflating and attaching the seat cushions to the boat.
Instructions for installing and using the fishing rod holder.
Detailed steps for assembling the oars for use.
Instructions for properly installing the boat's grab line.
Instructions for installing accessory lines and bags on the boat.
Guidelines for safe departure, operation, and required equipment.
Key rules and precautions to follow while navigating the boat.
Guidance on how to safely re-enter the boat from the water.
Recommendations for maintaining the boat's condition and proper storage.
Instructions for properly disassembling and storing the inflatable boat.
Common issues and solutions for inflatable boat problems.
Steps for patching and repairing punctures or leaks in the boat.
