EU Declaration of Conformity of Recreational Craft with the Design, Construction and
Noise Emission requirements of Directive 2013/53/EU
(To be completed by manufacturer or if mandated, authorised representative)
Name of recreational craft manufacturer: Intex Industries (Fujian) Co., Ltd.
Address: Shangzheng, Honglu
Town: Fuqing, Fujian Post Code: 350300 Country: P. R. of China
Name of Authorised Representative (if applicable): Intex Trading B.V.
Address: 4700 BB Roosendaal
Town: Post Code: P.B. Box 1075 Country: Netherlands
Module used for design and construction assessment: A A1 B+C B+D B+E B+F G H
Name of Notified Body for design and construction assessment (if applicable): N/A
Address:
Town: Post Code: Country: ID Number:
Notified Body certificate number (if applicable) : Date: / / /
Module used for noise emission assessment (if applicable): A A1 G H
Name of Notified Body for noise emission assessment (if applicable): N/A
Address:
Town: Post Code: Country: ID Number:
Notified Body certificate number (if applicable): Date: / / /
Other Community Directives applied:
DESCRIPTION OF RECREATIONAL CRAFT
Watercraft Identification Number
Brand name of the recreational craft: See Table 1 Type or number: See Table 1
Type of Construction:
Rigid Inflatable
Rigid –inflatable(RIB)
Type of hull:
Monohull Multihull
Hull Construction material:
Aluminium, aluminium alloys
Moulded fiber reinforced plastic
Steel, steel alloys Wood
Other (specify):
Recreational Craft
Design category(-ies) related to the maximum recommend number of
persons (See Table 1):
Engine power: Max. Recommended: 1.1 kW,
Installed: kW (if applicable)
Length of hull L
h
: m Beam of hull B
h
: m Max. Draught
T: m (See Table 1)
Integral exhaust propulsion (if applicable): Yes No
Maximum Recommended engine power: kW
Installed engine power: kW
Number of propulsion engines: #
Maximum recommended engine mass: kg
Craft main Propulsion:
Sails , projected sail area As m²
Human propulsion
Engine/motor propulsion
Other (specify):
Installed propulsion type (if applicable):
Outboard Inboard with shaft line
Z or sterndrive
Pot derive
Sail derive
Other (specify):
Installed engine type (if applicable):
Internal combustion,Diesel(CI)
Internal combustion,Petrol(SI)
Internal combustion, LPG/CNG
Electric
Other (specify):
Deck:
Fully enclosed Partially protected
Open
This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of the manufacturer that the recreational craft
mentioned above fulfils the requirements specified in Article 4 (1) and Annex I of Directive 2013/53/EU.
Name and function: John Lee (QA Manager) Signature and title: John Lee (QA Manager)
(identification of the person empowered to sign on behalf of the (or an equivalent marking)
manufacturer or his authorised representative)
Date and place of issue: P. R. of China (yr/month/day) 2020 / 09 / 10
227-****-R0-2107 English
To Next Page
Loading...
