309
PO
(309PO) MULTI-COLORED BATTERY OPERATED LED
LIGHT FOR INTEX
®
BUBBLE SPA ENGLISH 7.25” X 4.875” 04/25/2018
SAVE THESE INSTRUCTIONS
Page 3
To install or replace batteries:
1. Dry product completely. Unscrew the battery
housing cover
(1)
from the Spa LED light
(see Fig 1).
Be careful not to lose the two o-rings on the battery
housing cover.
2. Insert 3 AAA size batteries following the orientation
shown on the battery holder
(2)
(see Fig 2).
Fig 2
Fig 4
Fig 3
3. Reinstall the battery holder
(2)
into the LED light body according to the orientation (see Fig 3).
4. Securely tighten the battery housing cover
(1)
by hand only (see Fig 4).
Fig 1
O-rings
Fig 5
Upper Outlet Grid
5. Screw the Spa LED light onto the Spa
tub upper outlet grid fi tting, hand tighten
only (see Fig 5).
Note:
Do not allow water to get inside
the battery compartment, which can
damage the product and void the
warranty.
To Next Page
Loading...
Need help?
General
