inti CEDRO Series - Technical Specifications

19
TECHNICAL PARAMETERS
Model
ICC-2048150 ICC-3048150 ICC-4024150 ICC-4048150 ICC-5048150 ICC-6048150
MPPT efficiency
≥99,5%
Standby consumption
Heat dissipation method
Natural cooling
Battery system voltage range
12V 8VDC-15VDC (lead acid)
24V 18VDC-32VDC (lead acid)
Li-ion 8VDC-30VDC (default), ≤30VDC (optional)
Admissible PV range
0VDC - 150VDC
Vmpp minimum voltage
Battery voltage +2V
Startup charging voltage
Battery voltage +3V
Low input voltage protection
Battery voltage +2V
Overvoltage protection
150VDC
Overvoltage recovery protection
145VDC
Rated PV power
12V 260W 390W 520W 520W 650W 780W
24V 520W 780W 1040W 1040W 1300W 1680W
Li-ion 252W-504W 378W-756W 504W-1008W 504W-1008W 630W-1260W 756W-1680W
Lithium battery activation
Optional
Battery type (default GEL)
Sealed (SEL), Gel (GEL), Floaded (FLD), User defined (USE), Li Ion (Lit
20A 30A 40A 40A 50A 60A
Temperature compensation
-3mV/ºC/2V (default)
Charging method
3 steps: CC (constant current), CV (constant voltage), CF (floating charge
Output voltage stability accuracy
≤±0,2V
Load voltage
Same voltage as battery
Rated charging current
20A
Load control mode
Low voltage protection
10,5V (default), 11V (restored), settable
Communication
RJ45 dual port / RS485 protocol / PC (RS485-Cable USB) and App (WIFI module) / Central monitoring (parallel connection and
RS485-USB cable)
Protections
Input and output overvoltage, low and high battery voltage, reverse polarity protection, low and high temperature protection,
short-circuit protection, PV overcurrent protection.
Setting method
PC Software / App / Controller
Display
High definition LCD segment code backlight display.
Operating ambient temperature
-25ºC – +70ºC
Storage temperature
-25ºC – +70ºC
IP protection
IP43
Noise
≤10Db
0-300m
Altitude
Maximum wiring size
28mm2
Recommended breaker
≥40A ≥63A ≥63A ≥63A ≥100A ≥100A
Net weight / gross weight (kg)
1,7 / 2,03 2,4 / 2,83
289 * 212 * 105 mm 334 * 255 * 123 mm
220 * 148 * 58,8 mm 245 * 170 * 68,5 mm
*Technical specifications under laboratory test conditions: 25ºC, 1000msnm, RH 55%
Product dimensions
Packaging dimensions
Light switch control，Light + Time control，Manual switch，Testing switch，Always on
40A
0,2W
Rated load current
CEDRO CONTROLLER ICC-6048150 / ICC-5048150 / ICC-4048150 / ICC-3048150 / ICC-2048150 / ICC-
4024150 USER MANUAL
www.intipv.com