Need help?Do you have a question about the Intramech SWC-12-V-ECM and is the answer not in the manual?
Details the adherence to the internationally recognized ISO 9001 standard for quality assurance.
Confirms product conformity to European Community directives for safety standards.
Ensures product compliance with the WEEE directive for environmental solutions.
Highlights the use of advanced CAD/CAM technology and high international standards.
Describes the rigorous management of every manufacturing stage for high standards.
Explains quality control methods ensuring product reliability and efficiency.
Details the attractive, durable, flame-resistant ABS plastic cabinet.
Provides information on the water coil's heat transfer surface and features.
Describes the synthetic elastomer tube with stainless steel braiding.
Information on high-power-factor, permanent split capacitor blower motors.
Details the washable, easy-to-remove fine mesh air filters.
Explains the deflector blades and directional vanes for air flow.
Lists key design features of the microprocessor control system.
Provides an overview of the unit's general specifications.
Detailed specifications for the SWC-V-EC series, including 3-speed options.
Presents cooling capacity data for 2-pipe systems across various conditions.
Presents heating capacity data for 2-pipe systems across various conditions.
Provides detailed unit dimensions for specific SWC models.
Provides detailed unit dimensions for SWC-20 and SWC-24 models.
Information on the 2-way valve body, including dimensions and a differential pressure chart.
Considerations for choosing an optimal location for the high-wall unit.
Specific dimensions required for mounting plate installation.
Step-by-step instructions for securely installing the mounting plate.
Procedure for drilling the condensate drainage hole with correct slope.
Instructions for hooking and securing the hydronic unit onto the mounting plate.
Guidelines for proper installation and insulation of drainage piping.
How to open and close the lift-up grille cover on the unit.
Steps for removing the front cover assembly for maintenance.
Instructions for purging trapped air from the coil.
Information on accessing and making wiring connections.
Comprehensive details on the SK-NCSWC-001 complete function FCU controller.
Definitions of technical terms and abbreviations used in controls.
Defines the inputs and outputs for the FCU controller.
Illustrates the electrical wiring diagram for the SK-NCSWC-001 controller.
Instructions on setting up DIP switches for unit configuration.
Detailed control logic for 2-pipe system configurations.
Detailed control logic for 4-pipe system configurations.
Control logic specific to the dehumidification operating mode.
Control logic governing the automatic switching between modes.
Control logic and profiles for the energy-saving sleep mode.
Details on controlling the louver angle and swing positions.
Information on buzzer responses for unit commands.
Explains how operation parameters are retained after power loss.
Describes the operation of the unit's tactile ON/OFF switch.
Details the safety switch mechanism for the electric heater.
Table mapping LED blink codes to errors, reasons, and remedies.
LED indications for master unit detecting slave unit failures.
Explains the structure and functions of the master-slave network.
Step-by-step guide for connecting and setting up the master-slave network.
Methods for checking wire connections using color and multimeter.
Instructions for configuring the master unit using handset or wall pad.
Details on global and addressable communication modes.
Diagram illustrating the wiring for a master-slave network connection.
Defines inputs and outputs for the SK-NCSWC-002 controller.
Illustrates the electrical wiring for the SK-NCSWC-002 controller.
Details DIP switch settings for modulating signal and fan motor.
Explains the operational logic for the SK-NCSWC-002 controller.
Describes the LED status indicators for the controller.
Maps LED blink codes to errors, reasons, and remedies for the controller.
Lists the supported Modbus function codes and their descriptions.
Table of Modbus error codes with their definitions.
Defines Modbus coil registers, addresses, types, and remarks.
Defines Modbus discrete input registers, addresses, types, and remarks.
Defines Modbus holding registers, addresses, types, and remarks.
Defines Modbus input registers, addresses, types, and remarks.
Explanation of buttons and functions on the remote control handset.
Description of the display elements and indicators on the wired wall pad.
Instructions for using the wired wall pad for various functions.
How to navigate and view unit operating parameters on the wall pad.
How the wall pad indicates unit errors and faulty slave units.
Steps to adjust the EC unit's motor RPM using DIP switches and wall pad.
General| Brand | Intramech |
|---|---|
| Model | SWC-12-V-ECM |
| Category | Air Conditioner |
| Language | English |
To Next Page
