EasyManua.ls Logo

Invacare IOH200 User Manual

Invacare IOH200
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Operator And Maintenance Manual
Venture
®
HomeFill
II
Compressor
Model IOH200
DEALER/HOMECARE PROVIDER:
THIS MANUAL MUST BE GIVEN TO THE USER OF
THE COMPRESSOR.
REFER TO THE INFORMATION ON PAGE 3 OF THIS
MANUAL.
USER:
BEFORE USING THE COMPRESSOR, READ THIS
MANUAL AND SAVE FOR FUTURE REFERENCE.
Question and Answer IconNeed help?

Do you have a question about the Invacare IOH200 and is the answer not in the manual?

Invacare IOH200 Specifications

General IconGeneral
Flow RateUp to 10 LPM
Power Consumption300W
Electrical Requirements120 VAC +/- 10%, 60 Hz
TypeStationary Oxygen Concentrator
Oxygen OutputUp to 10 LPM
Oxygen Purity90% (+6.5% / -3%)
Operating Voltage120 VAC
AlarmsPower failure, High/Low pressure

Summary

Special Notes

Dealer Information

Checklist for Dealers

Essential checklist for dealers before leaving the compressor with a user.

Specifications

Compressor Specifications

Detailed specifications for the compressor's operation and physical attributes.

Regulator Specifications

Specifications related to the regulator's output capabilities.

Label Locations

General Guidelines

General Safety Warnings

Important safety precautions and warnings for using the compressor.

Handling Safety Guidelines

Safety guidelines for handling the compressor and cylinders.

Initial Setup

Initial Setup Checklist

A step-by-step checklist for the initial setup of the compressor.

Choosing Compressor Location

Guidelines on selecting an appropriate and safe location for the compressor.

Transporting the Compressor

Instructions on how to safely move and transport the compressor.

Installing the Power Cord

Detailed steps for connecting the compressor's power cord.

Connecting Compressor to Concentrator

Instructions for connecting the compressor to the oxygen concentrator.

Compressor Operation

Operation Checklist

Checklist to ensure all steps are completed before each cylinder fill.

Cylinder Prefill Inspection

Procedure for inspecting cylinders before filling to ensure safety and compatibility.

External Cylinder Examination

Instructions for visually inspecting the cylinder and its valve for defects.

Connecting Cylinder to Compressor

Step-by-step guide on how to physically connect the oxygen cylinder to the compressor.

Turning the Compressor On

Instructions on how to power on the compressor and interpret indicator lights.

Removing the Cylinder

Procedure for safely disconnecting and removing a filled cylinder from the compressor.

Setting Flow Knob to Prescribed Setting

How to adjust the flow knob to the prescribed oxygen flow rate.

Indicator Lights

Indicator Light Explanation

Explanation of the meaning and effect of each indicator light on the control panel.

Troubleshooting

Compressor Problems

Solutions for common issues and error conditions related to the compressor.

Cylinder Problems

Solutions for problems encountered with the oxygen cylinders.

Maintenance

Cleaning the Compressor Filter

Instructions on how to clean the compressor's air filter.

Cabinet Cleaning

Guidance on cleaning the exterior cabinet of the compressor.

Cylinder Fill Times

M6 and ML6 Size Cylinders

Estimated fill times for "M6" and "ML6" size oxygen cylinders.

C (M9) Size Cylinder

Estimated fill times for the "C" (M9) size oxygen cylinder.

Warranty

Limited Warranty Details

Comprehensive details of the warranty coverage, limitations, and exclusions.

Related product manuals