SAFETY AND OPERATING MANUAL
16
202093 ROTARY HAMMER 1500W
You must read operating instructions before using the tool. Keep operating instructions
with the tool. Keep operating instructions with the hammer, so that they may be referred to,
if necessary.
Voltage 230-240V ~50Hz
Power input 1500W
No load speed 850/min
Impact rate 4400/min
Protection class II
Max drilling capacity
- Masonry/Steel/Wood Ø32mm / Ø13mm / Ø 40mm
Max. chuck capacity SDS
Ø13mm (Manual chuck)
A weighted sound pressure L
PA
: (K=3dB(A)) 96,4 dB(A)
A weighted sound power L
WA
: (K=3dB(A)) 107,4 dB(A)
Vibration a
h
: (K=1,5m/s²)
- Hammer drilling into concrete
- Chiseling
19,372 m/s²
17,879 m/s²
Accessories in packing Electric hammer
Assistant handle
Depth gauge
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being drilled.
- The tool being in good condition and well maintained.
- The use the correct accessory for the tool and ensuring it is sharp and in good condition.
- The tightness of the grip on the handles and if any anti vibration accessories are used.
- And the tool is being used as intended by its design and these instructions.
1. TECHNICAL DATA
-
To Next Page