16
EN
l The air lter is clogged.
l The device is tilted instead of being in an upright position.
l The oor surface is not at.
l This is normal. This unit is supplied with an Auto defrost feature.
l Check the correct installation of the drain hose.
l Check for any blockage or damage of the drain hose.
AS - Humidity module sensor error - Power o unit and temporarily unplug allowing
device to reset. If error persists, call for service.
ES - Tube Temperature sensor error - Power o unit and temporarily unplug allowing
device to reset. If error persists, call for service.
EC - Refrigerant leakage detection - Unit auto detects refrigerant leakage, if this occurs
the EC code will appear. Power o unit and temporarily unplug allowing device to reset.
If error persists, call for service.
P2 - The water tank is full or not installed correctly - Empty the tank or install it properly.
All the pictures in the manual are for explanatory purposes only. The actual shape of the unit
you purchased may be slightly dierent, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and
the specications of the product for reasons, such as product improvement, are subject to
change without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for
further details. Any future updates to the manual will be uploaded to the service website, and
it is advised to always check for the latest version.
Scan here to download the latest version of this manual.
www.inventorappliances.com/manuals
To Next Page
Loading...