6. CONTROL PANEL • FUNCTIONS
POWER
By pressing the “POWER” button the dehumidier turns on or o. The “POWER” button
and Display will turn on.
• When set humidity level has been reached the unit’s compressor will
automatically stop as soon as the humidity level drops 3%-5% under the set
humidity level. The fan will continue operating for a while and will stop as
soon as the humidity remains below the desired level.
• In the event of a power failure the unit has an Auto Restart function. Once
power is restored, the appliance will automatically restart at the preselected
settings prior to the power failure.
CONT.
Continuous function: the dehumidifier operates continuously when the drainage
pipe is attached, or until the water tank is full, extracting humidity from the air. When
this function is active the indicator will turn on and the device will work constantly,
disregarding the relative humidity of the room and the desired humidity level set.
• For drying clothes: place the dehumidier in a small room and set nearby
the clothes rack. Keep doors shut and allow the dehumidifier to dry the
clothes.
• For special humidity conditions where big amounts of condensation need
to be extracted, such as extremely moist rooms.
• When immediate dehumidication is necessary such as in areas or rooms
not in use for an extended period of time, etc.
To Next Page
Loading...
Need help?
General
