INVENTOR FN40B-INV User Manual

7
ΕΝ
OPERATION INSTRUCTIONS
I. Remote Controller (Fig.10)
1. “
” On/O
Pressing the “
” key will turn on. The fan will start at normal mode. Press the “ ”
key again to turn o the fan.
2. “ ” Fan Speed
While the fan is operating, by pressing the “
” key will change the fan speed.
Available fan speed settings: 0-1-2-3 (O-Low-Medium-High).
3. “ ” Timer
While the fan is operating, by pressing the “
” key, you can set up the timer to turn
o the fan. While the fan is turned o, by pressing the “
” key, you can set up the
timer to turn on the fan.
You can select from 0.5 to 7.5 hours by pressing the “
” key again (each press
increases the timer by 0.5 hours).
The respective timer indication(s) on the display will light up.
You can add the light timer indications to read the selected/remaining time
until the unit turns on/o.
For instance, if the required timer setting is 6.5 hours, the “
” key must be
pressed repeatedly until the timer indication 0.5h, 2h and 4h are light at the
same time.
During the Timer operation, the light timer indications will change every 0.5
hours to indicate the remaining operation time.
To deactivate the Timer function and restore the continuous operation of the
fan, press the “
” key repeatedly until all timer indications are not light.
4. “
” Swing
While the fan is operating, pressing the “
” key will start the horizontal swing
of the fan. Press the “
” key again to turn o the horizontal swing function.
5. “
” Mode
While the fan is operating, by pressing the “
” key, you select between the 3 dierent modes of
operation (Normal-Natural-Sleep). The selected mode indication on the display will light up.
“ ” Normal operation of fan.
While the unit operates under Normal mode you can press the Fan Speed key to select between
the 3 available fan speeds (Low-Medium-High).
“
” Natural
Under Natural mode, the fan will continuously increase and decrease the fan speed to provide a
more natural wind feeling.
While the unit operates under Natural mode you can press the Fan Speed key to select between
the 3 available fan speeds (Low-Medium-High).
“
” Sleep
Under Sleep mode, the fan will provide air for more comfortable sleep, while working more
silently.
While the unit operates under Sleep mode you can press the Fan Speed key to select between the
3 available fan speeds (Low-Medium-High).
Fig.10
Fig.12
Fig.10
Fig.12

INVENTOR FN40B-INV Specifications

General

Brand	INVENTOR
Model	FN40B-INV
Category	Fan
Language	English