10
EN
• Under Child Lock: All control buttons are deactivated and the unit will make a
beeping sound each time a button is pressed.
• In case of a power failure the child lock setting will be automatically deactivated.
HUMIDITY CONTROL
Humidity Set Control Button.
The humidity level can be set within a range of 40% RH (Relative Humidity) to 80% RH
(Relative Humidity) and CO in 5% increments each time the relative button **
** is
pressed. The desired level of humidity will appear on the led display.
• By selecting the continuous mode “CO” the dehumidifier will operate
continuously extracting humidity. During CO mode the dehumidifier will keep
operating until the water tank is full, disregarding the relative humidity of the
room.
HUMIDITY LIGHT INDICATOR
The humidity light indicator will be continuously on under normal mode to inform you
about the level of ambient humidity inside the room.
• Blue color for relative humidity under 55%
• Yellow color for relative humidity between 56% and 79%
• Red color for relative humidity over 80%
MODE
By pressing the ‘’MODE’’ button you can select between four different modes: Normal,
ECO, Turbo and Smart Dehumidification (SMD).
Under Normal mode the dehumidifier is operating in medium fan speed to
reach the set humidity level. The number (2) will appear on the led display to indicate your
mode choice. When the set humidity is reached, the Energy Savings function is automatically
activated. After the predetermined timeframe and if the humidity levels have increased, the
device will resume dehumidification. It is a mode suggested for daily operation.
To Next Page
Loading...
Need help?
General
