11
EN
Under ECO mode the dehumidifier is operating in low fan speed to reach the set
humidity level. In this mode the consumption is reduced to half. The number (1) will appear
on the led display to indicate your mode choice. When the set humidity is reached, the Energy
Savings function is automatically activated. After the predetermined timeframe and if the
humidity levels have increased, the device will resume dehumidification.
Under Turbo mode the dehumidifier is operating in high fan speed to reach
the set humidity level. The number (3) will appear on the led display to indicate your mode
choice. When the set humidity is reached, the Energy Savings function is automatically
activated. After the predetermined timeframe and if the humidity levels have increased, the
device will resume dehumidification.
Under SMD mode the dehumidifier is operating
according to the existing temperature and ambient humidity conditions inside the room.
The letter (A) will appear on the led display to indicate your mode choice. The ideal humidity
level will be automatically set between 45% and 55% depending on the room temperature.
The higher the room temperature, the lower will be the set humidity level in order to achieve
ideal leaving conditions. The fan speed will be also automatically adjusted in low, middle and
high speed, depending on difference between the ambient humidity and the set humidity.
The bigger the difference the higher will be the fan speed.
This mode is suggested for situations with severe humidity, where big amount
of water needs to be distracted such us ooded rooms, for rooms that have
not been used for and long time, but it can only be selected for clothes drying.
• Position the dehumidier in a small sized room along with your clothes
horse. Keep doors shut, and your clothes will dry up in no time!
• For optimal results manual wringing of the clothes is suggested.
• Allow a 30-50cm distance between the unit and the clothes.
To Next Page
Loading...
Need help?
General
