11
Start
Off
6 hours later
Set
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want the
unit to turn on automatically before you return home.
The air conditioner will automatically start operating at
the set time.
Example:
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of
starting operation time and the signal “H” will show
on the display area.
2. Press the TIMER ON button to display “6.OH “ on the
TIMER ON display of the remote controller.
3. Wait for 3 seconds and the digital display area
will show the temperature again. The “TIMER ON”
indicator remains on and this function is activated.
!
CAUTION
• When you select the timer operation, the remote controller automatically transmits
the timer signal to the indoor unit for the specied time. Therefore, keep the remote
controller in a location where it can transmit the signal to the indoor unit properly.
• The eective operation time set by the remote controller for the timer function is
limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5,
7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 and 24.
Example of timer setting
To Next Page
Loading...
Need help?
General
